Flooring samples are available to buy for a small cost if you are unsure what finish or grade you require.

All flooring is supplied at 21mm thickness, ends matched and with stress relieving grooves to the underside. A micro-bevel is applied to the length of the board, (please advise if this is not required). The flooring is sanded to a 400 grit finish. The oiled option (as shown in illustration) is coated using a two-coat system, with a high grade flooring oil (low sheen). With the lacquered option we use water based flooring grade lacquer of 30% gloss (low sheen) higher gloss levels are available upon request.

All of our flooring is produced in our own production facility, enabling us to produce your floor to your requirements, as well as producing any ancillary mouldings you may need, for example skirting, architrave, door linings, as well the finishing mouldings to give your floor the professional finish.

When adding quantity, please add the total number of square meters you require to the nearest square meter. You can use the material calculator on the left-hand side of your screen to work this out. If you require any help with your order please call the office on (01205) 722700.

Prime or Character?

Prime - Tolerance on each face of two intergrown sound knots of 12mm maximum diameter, or this equivalent per linear metre. Slope of grain: almost straight .Not acceptable: sapwood, heart spiral and curly grain deterioration, cross grain, bark pocket, bore holes, warping. Surface checks tolerated.

Character- Presence on each face of small knots without limitation, and of a maximum of three sound knots per metre, maximum diameter not to exceed one half of the width of the timber or 40mm or equivalent.